基于动叶调节机构典型安装方式的炉膛负压优化控制研究Optimization and Control of Furnace Negative Pressure based on the Typical Installation of Adjustable Blade Regulating Mechanism
朱继峰,丁俊宏
ZHU Jifeng,DING Junhong
摘要(Abstract)：
从热工自动化专业角度分析浙江某电厂炉膛负压波动大的原因,主要介绍其在对动调执行机构典型安装方式的研究并予以优化,消除控制死区,改善炉膛负压自动品质,提高了机组可靠性。
This paper analyzes reasons of large furnace negative pressure fluctuation in a power plant in Zhejiang province in terms of thermal automation and introduces the research and optimization of the typical installation method of the actuator to eliminate the control dead zone, improve automatic quality of furnace negative pressure and boost reliability of the unit.
关键词(KeyWords)：
热工自动化;典型安装;控制死区;负压;自动
thermal automation;typical installation;control dead zone;negative pressure;automation
基金项目(Foundation):
作者(Author):
朱继峰,丁俊宏
ZHU Jifeng,DING Junhong
DOI: 10.19585/j.zjdl.201707008
参考文献(References)：
- [1]朱北恒.火电厂热工自动化系统试验[M].北京:中国电力出版社,2006.
- [2]王树青.自动化与仪表工程师手册[M].北京:化学工业出版社,2014.
- [3]钱义生.1 000 MW机组风烟系统故障分析及优化[J].浙江电力,2013,33(10):38-40.
- [4]张乐君,付永华.轴流式引风机失速原因分析及预防措施[J].浙江电力,2009,29(5):68-70.
- [5]衡丽君,段坤杰,何长征.某电厂引风机改型方案研究[J].节能技术,2010,28(2):187-189.
- [6]马士东.600 MW机组AN型轴流引风机故障分析及处理[J].安徽电力,2010,27(4):12-14.
- [7]林英明,邹光球,汤舟虹,等.电站锅炉引风机常见故障分析及处理方法[J].化工装备技术,2013,34(1):58-60.
- [8]何伟.引风机动叶故障原因分析及处理措施[J].广东电力,2015,28(8):81-83.