沈海涛,邓芙蓉
SHEN Hai-tao,DENG Fu-rong(Zhejiang Tiandi Environmental Protection Engineering Co.

• 1:浙江天地环保工程有限公司

摘要(Abstract)：

某发电厂2台660 MW机组脱硫装置在投运后8个月内,GGH至吸收塔原烟道发生很大的整体位移,将吸收塔入口处的膨胀节拉裂,导致烟气泄漏。通过对烟道整体结构的分析,提出了相应的改进措施。实际运行情况证明改造合理有效。
The excessive displacement of the flue between GGH and absorber happened during eight months after FGD operation in 2×660 MW units of a power plant.The cracks appeared on the expansion joint at the absorber inlet that led to gas leakage.The treatment measure is put forward through the analysis of the whole flue structure.The actual operation after improvement indicates that the retrofit is reasonable and effective.

关键词(KeyWords)： 湿法脱硫;烟道;膨胀节;破裂
WFGD;flue;expansion joint;crack

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 沈海涛,邓芙蓉
SHEN Hai-tao,DENG Fu-rong(Zhejiang Tiandi Environmental Protection Engineering Co.

DOI: 10.19585/j.zjdl.2013.08.014

参考文献(References)：

• 邵峰,戎淑群.湿法烟气脱硫工艺系统介绍与分析[J].能源工程,2005(5):42-47.
• DL/T 5121-2000火力发电厂烟风煤粉管道设计技术规程[S].北京:中国电力出版社,2000.
• GB 50017-2003钢结构设计规范[S].北京:中国计划出版社,2003.