基于概率分析的连锁保护“三选一”逻辑算法可靠性分析Reliability Analysis of "One-out-Three" Logic Algorithm for Chain Protection Based on Probability Analysis
莫布林,柳长海,余小敏
MO Bulin,LIU Changhai,YU Xiaomin
摘要(Abstract)：
为了能够评价和掌握"三选一"逻辑算法在具体应用中的可靠性,提高其正确动作率,运用概率论的有关性质,选择引起测量故障的常用指标,在一定范围内分析和计算出该逻辑算法的正确动作、拒动和误动事件出现的概率,分析各种事件出现概率的规律,根据规律提出改进该逻辑算法的途径及应用注意事项。经过增加参考量,算法的正确动作率得到提高,拒动率降低。因此,重视算法的报警监视并及时消除故障,算法就能够维持在较高的可靠度上。
To evaluate and learn the reliability of the "One-out-Three" logic algorithm in specific applications and improve its correct operation rate, relevant properties of probability theory are employed, and common indices that cause measurement faults are chosen to analyze and calculate the probability of correct operation, operation failure and maloperation of the logic algorithm; a rule of the probability of all events is analyzed, and the routine for improvement of the logic algorithm and precautions in its application are proposed.By increase of reference quantity, the correct operation rate of the algorithm is improved, and the operation failure lowered. Therefore, the high liability of the logic algorithm can be maintained by attaching importance to alarming, monitoring and timely fault elimination.
关键词(KeyWords)：
三选一;概率论;真值;坏点;正偏差;负偏差;参考量
One-out-Three;probability theory;truth value;dead pixels;positive deviation;negative bias;reference quantity
基金项目(Foundation): 中国华电集团有限公司广东公司科技项目（HDGDKJ19-01-33)
作者(Author):
莫布林,柳长海,余小敏
MO Bulin,LIU Changhai,YU Xiaomin
DOI: 10.19585/j.zjdl.202009014
参考文献(References)：
- [1]高晓晨.冗余配置4个热工测点的优选方案[J].华电技术,2016,38(9):44-45.
- [2]刘鑫杰,钱虹,古雅琦.变送器冗余结构对紧急停堆系统可靠性影响分析[J].核电子学与探测技术,2018,38(4):577-582.
- [3]司瑞才,郑媛,王长利,等.350 M W超临界机组循环流化床锅炉主保护分析[J].发电设备,2016,30(4):274-277.
- [4]张倩.浅析热工模拟量测点与开关量测点可靠性[J].科技风,2016(15):160.
- [5]王志良.除氧器液位测量方式的改进[J].产业与科技论坛,2015,14(1):76-78.
- [6]王庆晋.炉膛压力保护和控制的优化[J].山东电力技术,2014(2):74-76.
- [7]何静涵,王跃红.智能电能表计量准确性的影响因素及改进对策[J].计量与测试技术,2018,45(8):78-79.
- [8]王文龙.煤化工系统仪表典型故障与分析[J].山西化工,2018,38(4):111-113.
- [9]陈杰.机电设备故障与维修管理方法探索[J].中国设备工程,2019(24):48-50.
- [10]谢强.浅谈化工仪表故障分析与处理[J].化工管理,2019(6):28-29.
- [11]潘书林,教富森,孙自军,等.热工联锁保护信号品质算法的改进[J].中国煤炭,2014,40(增刊1):207-210.
- [12]张宁.火电机组热工保护可靠性分析[J].山东工业技术,2016(22):165-166.
- [13]莫布林.锅炉炉膛压力保护系统改造[J].华电技术,2018,40(7):29-31.
- [14]贾长武.相关量证实法在提高热工保护.、联动可靠性中的应用[J].中国电力,2014,47(9):25-28.
- [15]朱延海,黄卫军,郑志刚.DCS光字报警设计和应用[J].中国煤炭,2014,40(增刊1):164-167.