余虹云,钱苗,高义波,钱科,李文仙
YU Hongyun,QIAN Miao,GAO Yibo,QIAN Ke,LI Wenxian

• 1:浙江华电器材检测研究所国家电力器材产品安全性能质量监督检验中心

摘要(Abstract)：

为解决电力行业标准《输电杆塔紧固件抗振防松试验技术要求》中试验频率和空载振幅的取值问题,选取了3种常规振幅和3种常规频率,对同一批次紧固件进行了横向振动试验研究。研究结果表明,3种频率对紧固件的横向振动试验结果影响不大,而不同空载振幅对紧固件的横向振动试验结果有较大影响。进一步研究了紧固件发生横向振动断裂的试验条件,最终提出一组试验频率、空载振幅的建议值,为编制电力行业标准《输电杆塔紧固件横向振动试验技术要求》提供参考依据。
To discuss the test frequency and non-load amplitude value in the power industry standard of Technical Requirements for Anti-vibration and Loose Proof Tests of Fasteners Used in Pole and Tower of Transmission Line, the paper selects 3 regular amplitudes and 3 regular frequencies to and conducted transverse vibration tests on the same batch of fasteners. The result shows that the three frequencies barely have effects on the transverse vibration test results while the non-load amplitude has significant influences. Furthermore, the article further investigates the test conditions when transverse vibration rupture occurs, and provides a set of test frequency and non-load amplitude value, providing references to compilation of Technical Requirements for Anti-vibration and Loose Proof Tests of Fasteners Used in Pole and Tower of Transmission Line.

关键词(KeyWords)： 紧固件;横向振动;频率;振幅
fasteners;transverse vibration;frequency;amplitude

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 余虹云,钱苗,高义波,钱科,李文仙
YU Hongyun,QIAN Miao,GAO Yibo,QIAN Ke,LI Wenxian

DOI: 10.19585/j.zjdl.2016.11.016

参考文献(References)：

• [1]GB/T 10431-2008紧固件横向振动试验方法[S].北京:中国标准出版社,2008.
• [2]窦金峰,韩宝林,宋广伟,等.电力输配电铁塔紧固件的松动和防松方法[J].应用技术,2010(11):173-176.
• [3]李维荣.螺纹紧固件防松技术及试验方法研究[D].合肥:合肥工业大学,2005:26-28.
• [4]GB/T 16823.1-1997螺纹紧固件紧固通则[S].北京:中国标准出版社,1997.
• [5]王文周.未知σ,t检验法剔除异常值最好[J].四川工业学院学报,2000,19(3):84-86.