张杰,唐丽婷
ZHANG Jie,TANG Liting

• 1:西安益通热工技术服务有限责任公司
• 2:中联西北工程设计研究院有限公司

摘要(Abstract)：

以中国首台投产的变流器控制的BEST（背压式抽汽汽轮机）小机在超超临界二次再热机组中的应用为研究对象，描述了BEST小机的控制运行方式，并针对BEST小机在调试过程中出现的问题进行了分析，如变流器控制方式下超负荷、BEST小机甩负荷时给水流量波动大、BEST小机从小汽轮机电液控制系统方式切换至变流器控制时跳闸等。通过运行参数及控制方式的调整，如提高小机背压、减缓小机调门动作幅度及增加转速信号采集时间等，最终有效解决了问题，使BEST小机进入节能高效的调门全开控制方式。在后期机组变负荷过程中，小机给水流量、抽汽回热系统及小发电机功率均能正常匹配，可为同类新建机组提供参考。
The application of the first converter controlled BEST(back pressure extraction steam turbine) in the ultra-supercritical secondary reheat unit is studied as the object. The control operation mode of the BEST is described, and the problems in the commissioning process of the BEST, such as the overload in converter control mode, the great fluctuation of feed water flow produced by the load dump of BEST, and the trip of BEST controlled from MEH(micro electro-hydraulic control system) mode to converter mode, are analyzed. By the adjustment of operation parameters and control modes, such as improving the back pressure of BEST, retarding the regulating valve movement range of BEST and increasing the acquisition time of speed signal and so on, finally the problems are effectively solved, making the BEST into energy-efficient regulating valve full control mode. Afterwards, in the process of turbine changing to load, feed water flow and extraction system and small generation power are properly matching, which can provide reference for similar new units.

关键词(KeyWords)： 背压式抽汽汽轮机;变流器;小发电机;超负荷;甩负荷
back pressure extraction steam turbine;converter;small generator;overload;load dump

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 张杰,唐丽婷
ZHANG Jie,TANG Liting

DOI: 10.19585/j.zjdl.202307014

参考文献(References)：

• [1]李官鹏，刘义达，安强，等.1 000 MW超超临界二次再热机组系统比较及经济性分析[J].电力勘测设计，2018(5):52-55.LI Guanpeng,LIU Yida,AN Qiang,et al.System comparison and economic analysis of 1 000 MW ultra-supercritical double reheat units[J].Electric Power Survey&Design,2018(5):52-55.
• [2]程辉.超超临界二次再热1 000 MW机组回热系统优化[J].能源科技，2020,18(2):47-50.CHENG Hui.Optimization of regenerative system of 1 000MW ultra supercritical double reheat unit[J].Energy Science and Technology,2020,18(2):47-50.
• [3]王建华，范佩佩，石峰，等.给水旁路调节下高压加热器的瞬态应力分析[J].发电技术，2019,40(4):329-338.WANG Jianhua,FAN Peipei,SHI Feng,et al.Transient stress analysis of high pressure heater during feedwater bypass regulations[J].Power Generation Technology,2019,40(4):329-338.
• [4]邓攀，王亚军.BEST技术用于超超临界二次再热机组的可行性分析[J].中国电力，2018,51(7):84-89.DENG Pan,WANG Yajun.Feasibility analysis on BESTtechnology for ultra supercritical units with double-reheat cycle[J].Electric Power,2018,51(7):84-89.
• [5]李冰天.1 000 MW超超临界EC-BEST二次再热机组经济性分析[J].热能动力工程，2018,33(11):36-41.LI Bingtian.Economic analysis of 1 000 MW ultra supercritical EC-BEST secondary reheat unit[J].Journal of Engineering for Thermal Energy and Power,2018,33(11):36-41.
• [6]朱朝阳.BEST热力系统焓升分配和再热蒸汽压力优化[J].热力发电，2017,46(4):88-92.ZHU Chaoyang.Enthalpy rise distribution and optimization of reheat steam pressure for BEST system[J].Thermal Power Generation,2017,46(4):88-92.
• [7]高清林，高嘉锜，陈敦炳，等.汽轮机运行调节方式优化策略探析[J].汽轮机技术，2021,63(1):61-64.GAO Qinglin,GAO Jiaqi,CHEN Dunbing,et al.Analysis on optimization strategy of steam turbine operation adjustment mode[J].Turbine Technology,2021,63(1):61-64.
• [8]李昱，郭宏，平朝春，等.基于电流源变流器的永磁同步电机驱动系统全状态变量预测转矩控制[J].电工技术学报，2021,36(1):15-26.LI Yu,GUO Hong,PING Zhaochun,et al.A full-state variable predictive torque control of current source converter fed permanent magnet synchronous motor drives[J].Transactions of China Electrotechnical Society,2021,36(1):15-26.
• [9]蔺奕存，普建国，高景辉，等.变流器在抽汽背压式给水泵汽轮机系统中的应用研究[J].热力发电，2022,51(4):179-187.LIN Yicun,PU Jianguo,GAO Jinghui,et al.Application research of converter in back pressure extraction steam turbine in feed water system[J].Thermal Power Generation,2022,51(4):179-187.
• [10]王雅倩，付亦葳，张泽雄，等.BEST系统变工况特性及控制方式研究[J].热能动力工程，2019,34(5):42-48.WANG Yaqian,FU Yiwei,ZHANG Zexiong,et al.Study on the off-design characteristics and control methods of BEST system[J].Journal of Engineering for Thermal Energy and Power,2019,34(5):42-48.
• [11]刘莎，沈炯，王培红.基于热经济学的热力系统主蒸汽压力-排汽压力联合优化[J].热力发电，2020,49(1):10-16.LIU Sha,SHEN Jiong,WANG Peihong.Joint optimization of main steam pressure and exhaust steam pressure in thermal system based on thermoeconomics[J].Thermal Power Generation,2020,49(1):10-16.
• [12]吴仕芳，康明，董成龙.汽轮机高压缸鼓风发热实例研究[J].热力透平，2020,49(4):284-288.WU Shifang,KANG Ming,DONG Chenglong.Case study on blast heating of high pressure cylinder of steam turbine[J].Thermal Turbine,2020,49(4):284-288.
• [13]林湖，周兰欣，胡学武，等.背压变化对汽轮机功率影响的计算修正[J].汽轮机技术，2004,46(1):18-20.LIN Hu,ZHOU Lanxin,HU Xuewu,et al.Rectification and calculation the effect on turbine power of back pressure variation[J].Turbine Technology,2004,46(1):18-20.
• [14]刘利，陈啸，李国庆.1 000 MW机组小汽轮机排汽供热经济性分析[J].山西电力，2021(5):56-58.LIU Li,CHEN Xiao,LI Guoqing.Economic analysis of exhaust steam heating for small steam turbine of 1 000MW unit[J].Shanxi Electric Power,2021(5):56-58.
• [15]李玉宝，何振宇，吴昕，等.供热背压式小汽轮机甩负荷分析研究[J].电站系统工程，2020,36(5):58-60.LI Yubao,HE Zhenyu,WU Xin,et al.Analysis and research on load rejection of small steam turbine with heating back pressure[J].Power System Engineering,2020,36(5):58-60.
• [16]卢化，蔡钧宇，蔡萍萍，等.国产分散控制系统主要性能测试对比[J].热力发电，2022,51(3):191-198.LU Hua,CAI Junyu,CAI Pingping,et al.Comparisive test of main performance of domestic distributed control system[J].Thermal Power Generation,2022,51(3):191-198.