胡剑,张宝
HU Jian1, ZHANG Bao2(1.Zhejiang Guohua Zheneng Power Generation Co. Ltd.

• 1:浙江国华浙能发电有限公司
• 2:浙江省电力试验研究院

摘要(Abstract)：

针对某电厂国产600MW汽轮机高压调节汽门运行中多次出现阀杆脱落的问题,从制造缺陷与安装工艺等方面深入分析原因,认为阀杆套底孔加工失误、螺纹加工间隙过大、安装紧力不足等因素是造成汽门阀杆脱落的主要原因,并结合实际给出了行之有效的解决阀杆脱落的办法。
The high pressure governing valve level fall-off occured many times in 600 MW steam turbine of one power plant. After analyzing the reason from two aspects of manufacture and installation, the ultimate causes were advanced, such as the valve lever half machining error, screw thread clearance inaccuracy and tightness deficiency, etc. With some feasible and effectual measures, the problem of valve level fall-off was resolved.

关键词(KeyWords)： 600MW;汽轮机;高压调节汽门;阀杆脱落;螺纹
600 MW; steam turbine; high pressure governing valve; valve level fall-off; screw thread

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 胡剑,张宝
HU Jian1, ZHANG Bao2(1.Zhejiang Guohua Zheneng Power Generation Co. Ltd.

DOI: 10.19585/j.zjdl.2009.03.013

参考文献(References)：

• [1]郑生斌,张小三,张龙英.汽轮机调速汽门阀杆断裂问题分析与探讨[J].山西电力,2001(6):55-56.
• [2]郑绍臣,高福升.汽轮机调速汽门阀杆断裂原因及结构改进[J].中国电力,1996,29(10):63-65.
• [3]张奇,徐义巍.捷制500MW汽轮机组高压调汽门门杆断裂的原因分析及改进[J].山西电力,2002(5):51-52.
• [4]李彦东,李之栩.300MW汽轮机调节汽阀阀杆脱落原因分析[J].热力发电,2007,36(8):64-65.
• [5]屠珊,孙弼,毛靖儒.气流诱发调节阀杆振动的研究[J].动力工程,2004,24(5):729-731.