张宝,樊印龙,吴文健,顾正皓
ZHANG Bao,FAN Yinlong,WU Wenjian,GU Zhenghao

• 1:国网浙江省电力公司电力科学研究院

摘要(Abstract)：

介绍了DEH 3种典型的汽轮机防超速功能,结合甩负荷试验,描述了每种防超速功能的正确动作过程,给出了相应的失效案例。通过分析指出,防超速功能失效多发生在汽轮机控制系统改造或改型、汽轮机液压调节系统改造、防超速功能逻辑或定值修改后以及甩负荷前静态仿真试验未进行等情况下,建议要慎重对待汽轮机控制系统改造与定值修改工作,在甩负荷试验之前应通过静态试验对防超速功能进行检查。
The paper introduces three typical overspeed prevention functions of steam turbine. In combination with load shedding test, the paper describes the correct action process of each overspeed prevention function and gives corresponding failure cases. Through analysis, the paper points out that the failure of overspeed prevention mostly occurs after the control system of steam turbine is retrofitted or remodeled, steam turbine hydraulic governing system is retrofitted, logic or setting value modified and absence of static simulation test prior to load shedding. This paper suggests being serious about control system retrofit of steam turbine or setting value modification; moreover, checking overspeed prevention function through static simulation test before load shedding test is conducted.

关键词(KeyWords)： 汽轮机;甩负荷;试验;防超速
steam turbine;load shedding;test;overspeed prevention

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 张宝,樊印龙,吴文健,顾正皓
ZHANG Bao,FAN Yinlong,WU Wenjian,GU Zhenghao

DOI: 10.19585/j.zjdl.2015.09.015

参考文献(References)：

• [1]田丰.我国600 MW等级汽轮机甩负荷试验现状分析[J].汽轮机技术,2010,52(3):221-224.
• [2]DL 1270-2013火力发电建设工程机组甩负荷试验导则[S].北京:中国电力出版社,2014.
• [3]胡洲.采用高压缸启动方式机组OPC功能试验研究[J].热力发电,2013,42(9):81-86.
• [4]张宝,徐熙瑾,沈全义.甩负荷预测功能失效时的甩负荷试验[J].汽轮机技术,2006,48(2):124-126.
• [5]童小忠,张宝,周轶喆,等.汽轮机再热调节阀快关过程异常分析及处理[J].热力发电,2009,48(11):53-56.
• [6]俞成立.1 000 MW汽轮机组甩负荷试验分析[J].华东电力,2007,35(6):32-34.
• [7]王学根.某超超临界660 MW燃煤机组FCB试验不成功原因分析及改进[J].华东电力,2014,42(7):1503-1505.