变频器测试用模拟电子负载设计研究及仿真验证Design and Simulation Verification of Electronic Analog Load for Frequency Converter Test System
吴跨宇,蔡慧,卢岑岑,阎晗
WU Kuayu,CAI Hui,LU Cencen,YAN Han
摘要(Abstract):
为了进行变频器高低电压穿越能力等相关测试,在简单阐述一种基于电力电子全控器件、用于模拟负载电动机特性的变频器电子负载设计方法及控制策略的基础上,通过理论分析给出了最低输出频率和后置变压器变比之间的关系,通过仿真验证了该电子负载在不小于最低输出频率的情况下,能够实现在变频器变频时保持输出电流基本不变的特性。对高、低电压穿越过程中的变频器模拟负载适用性进行了研究,针对低压穿越问题给出了一种合理的有功电流给定策略,通过仿真验证了电子负载能满足高低压穿越测试的负载要求。
In order for tests such as high and low voltage ride through capabilities of frequency converter, the paper elaborates on a design method and control strategy of electronic analog load for frequency converter used for simulating load motor characteristics based on full control type power electronic device. By theoretical analysis, the paper presents the relationship between minimum output power and transformation ratio of rear transformer; through simulation, it demonstrates that the output current almost keeps unchanged during frequency conversion with the electronic load not lower than the minimum output power. The paper conducts applicability research of analog load for frequency converter during high and low voltage ride through, according to which it presents a reasonable given strategy of active current. It is demonstrated through simulation that electronic load can meet the load requirement of low voltage ride through test.
关键词(KeyWords):
并网逆变器;变频器;电子负载;电压穿越
grid-connected inverter;frequency converter;electronic load;voltage ride through
基金项目(Foundation):
作者(Author):
吴跨宇,蔡慧,卢岑岑,阎晗
WU Kuayu,CAI Hui,LU Cencen,YAN Han
DOI: 10.19585/j.zjdl.2016.04.010
参考文献(References):
- [1]马志伟.基于直驱电机的电动负载模拟系统研究[D].武汉:华中科技大学,2007.
- [2]王斌.变频器模拟负载试验系统的设计[J].变频器世界,2013(1):101-102.
- [3]陈丽林.高压变频器试验系统的负载模拟[D].武汉:华中科技大学,2007.
- [4]于峰昌.能馈型电子负载研究[D].长沙:中南大学,2008.
- [5]魏星.基于LCL滤波器的三相并网逆变器的研究[D].南京:南京航空航天大学,2011.
- [6]胡雪峰,韦徵,陈轶涵,等.LCL滤波并网逆变器的控制策略[J].中国电机工程学报,2012(27):142-148.
- [7]邱燕.三相并网逆变器滤波及锁相技术研究[D].南京:南京航空航天大学,2012.
- [8]叶双,郭耀华.变频器在电机测试平台的应用[J].电机与控制应用,2007(7):54-56.
- [9]张志刚.变频器欠压故障分析及其处理措施[J].民营科技,2015(8):34.