交流500kV交联聚乙烯海缆制造工艺控制要点Critical Control Point for Manufacturing Process of 500 kV XPLE Insulated Submarine Cable
李特,王少华,姜文东,胡文堂,任广振,曹俊平,顾国强
LI Te,WANG Shaohua,JIANG Wendong,HU Wentang,REN Guangzhen,CAO Junping,GU Guoqiang
摘要(Abstract)：
为更好地指导交流500 kV XLPE海缆的制造,保障产品质量稳定性,结合世界上首个500 kV XLPE海缆工程,对交流500 kV XLPE海缆本体制造工艺控制要点进行了总结分析。结果表明:导体绞合、绝缘生产、大直径铅套连续挤出等是海缆本体制造的关键工艺;对于导体绞合,需从生产设备选择、导体表面状态控制、单丝直径及节径比控制等方面保证导体性能;对于绝缘生产,需从绝缘料的选用、偏心在线监测、绝缘除气等方面确保绝缘挤制过程中不出现影响绝缘强度的缺陷;对于大直径铅套连续挤出,可通过合理控制机头温度、实时监测铅套厚度等方面确保铅套的挤制质量。
In order to guide the manufacture of the 500 k V cross-linked polyethylene(XLPE) insulation submarine cable and ensure the quality stability of the production, the process control during the production is summarized based on the first 500 k V XLPE submarine AC cable project in the world. It is indicated that conductor stranding, insulation production and extrusion of large-diameter lead sheath are critical to the cable property. The selection of production equipment, the conductor surface state control, the control of filament diameter and lay ratio is the key to ensure the conductor performance. The cable insulation works under large electric strength, method such as the selection of insulation material, the on-line monitoring of eccentric and insulation outgassing are necessary to eliminate the defects in insulation. To prevent the defects in large-diameter lead sheath, the measurements such as control of extrusion temperature and on-line monitoring of thickness are essential.
关键词(KeyWords)：
交联聚乙烯;海底电缆;工艺;绝缘除气;铅套
XPLE;submarine cable;process;insulation outgassing;lead sheath
基金项目(Foundation): 国家电网公司科技项目(5211DS17002F)
作者(Author):
李特,王少华,姜文东,胡文堂,任广振,曹俊平,顾国强
LI Te,WANG Shaohua,JIANG Wendong,HU Wentang,REN Guangzhen,CAO Junping,GU Guoqiang
DOI: 10.19585/j.zjdl.201806001
参考文献(References)：
- [1]钱可弭,陆莹,郑明,等.海上风电场高压XLPE绝缘海缆可靠性评估的方法[J].电线电缆,2016,59(1):1-6.
- [2]吴爱国,袁舟龙,公言强.国内海底电缆深埋敷设施工技术综述[J].浙江电力,2015,34(3):57-62.
- [3]钟力生,任海洋,曹亮,等.挤包绝缘高压直流电缆的发展[J].高电压技术,2017,43(11):1-17.
- [4]卢志飞,何旭涛,林晓波,等.洋流冲刷下的海底电缆动力学有限元分析[J].电线电缆,2017,60(5):6-8.
- [5]李伯颐,崔厚坤,安增军,等.单段高压电缆最大允许敷设长度研究[J].电线电缆,2017,60(5):42-46.
- [6]樊友兵,饶文彬,刘松华,等.回流导体提升单芯海底电力电缆载流量研究[J].电气应用,2017,36(11):58-61.
- [7]陈良元,张咏,陈亮,等.一种新型的XLPE电缆金属护套接地电流在线监测系统[J].电气时代,2017,36(5):90-92.
- [8]张磊,宣耀伟,乐彦杰等.110 k V单芯海缆的载流量计算、温度场仿真及其热循环试验研究[J].高压电器,2016,52(6):135-140.
- [9]刘磊,李斌,罗兵,等.500 k V海底电缆损耗分析与节能措施[J].南方电网技术,2015,9(9):71-75.
- [10]崔琳靖,马勇虎.带有屏蔽层的BSCCO电缆的交流损耗特性研究[J].低温与超导,2017,45(8):57-60.
- [11]梅文杰,杨洪亮,李春梅,等.高压直流海底电缆异形单线圆形紧压导体的设计[J].光纤与电缆及其应用技术,2016(6):13-15.
- [12]赵春丽.阻水型导引电缆结构及性能的探讨[J].工业设计,2016(12):156-157.
- [13]任思佳,狄健,宋程成,等.大长度海底电缆铅套生产工艺控制要点[J].电线电缆,2016,59(3):21-23.
- [14]董兆林,水利飞,王社峰,等.交联聚乙烯绝缘电缆防水的必要性及其措施[J].光纤与电缆及其应用技术,2017,41(1):43-44.
- [15]杨甫军,席菲菲,祁登权.海底电力电缆防腐性能研究[J].电线电缆,2016,59(4):23-24.
- [16]席菲菲,张刚强,高诺.高压电力电缆皱纹铝护套挤制工艺探讨[J].电线电缆,2010,53(4):25-27.