钱苗,余虹云,王梁,李国勇,俞敏波
QIAN Miao,YU Hong-yun,WANG Liang,LI Guo-yong,YU Min-bo(Zhejiang(Provincial) Electric Power Company-SGCC Testing Technology Lab of Electrical Equipment Safety Performance

• 1:浙江省电力公司-国家电网公司电力器材安全性能检测技术实验室

摘要(Abstract)：

热镀锌螺栓是输电线路杆塔和变电站构架的重要紧固零件,施工时常因扭矩系数未知而导致紧固螺栓有随意性,存在安全隐患。为统计热镀锌螺栓扭矩系数的合理范围,对不同品牌、不同规格的热镀锌螺栓进行扭矩系数测定,对有效结果进行统计分析。分析结果表明,70%的热镀锌螺栓扭矩系数为0.4~0.6,95%的热镀锌螺栓扭矩系数为0.3~0.7。
The hot galvanized bolt is the key fastening piece for poles and towers of transmission lines and substation frameworks.Due to known torque coefficient in construction,the bolts are fastened arbitrarily,which is potentially hazardous.In order to collect the reasonable scope of torque coefficient of hot galvanized bolts,the torque coefficients of hot galvanized bolts of different brands and types are measured,and the effective results are statistically analyzed.The result shows that torque coefficients of 70 out of 100 hot galvanized bolts are between 0.4 and 0.6,and 95 out of 100 are between 0.3 and 0.7.

关键词(KeyWords)： 热镀锌;螺栓;扭矩系数;测定;分析
hot galvanized;bolts;torque coefficient;determination;analysis

Abstract:

Keywords:

基金项目(Foundation): 国家电网公司科技项目(ZDK118-2010)

作者(Author): 钱苗,余虹云,王梁,李国勇,俞敏波
QIAN Miao,YU Hong-yun,WANG Liang,LI Guo-yong,YU Min-bo(Zhejiang(Provincial) Electric Power Company-SGCC Testing Technology Lab of Electrical Equipment Safety Performance

DOI: 10.19585/j.zjdl.2013.06.005

参考文献(References)：

• 余虹云,俞成彪,李瑞,等.电力线路器材应用与检测[M].北京:中国电力出版社,2007.GB/T 1231-2002
• 钢结构用高强度大六角头螺栓、大六角螺母、垫圈技术条件[S].北京:中国标准出版社,2002.
• GB/T 3098.1-2010螺栓机械性能螺栓、螺钉和螺柱[S].北京:中国标准出版社,2010.
• GB/T 16823.3-1997螺纹螺栓拧紧试验方法[S].北京:中国标准出版社,1997.