浙江电力

2019, v.38;No.281(09) 34-37

[打印本页] [关闭]
本期目录(Current Issue) | 过刊浏览(Archive) | 高级检索(Advanced Search)

激光衍射法应用于石灰石粉粒度分析的可行性研究
Feasibility Study on the Application of Laser Diffraction Method in Particle Size Analysis of Limestone Powder

叶小君,韩洪滨,郑志明,李海燕,明菊兰,汤治,程一杰
YE Xiaojun,HAN Hongbin,ZHENG Zhiming,LI Haiyan,MING Julan,TANG Zhi,CHENG Yijie

摘要(Abstract):

为研究激光衍射法应用于石灰石粉粒度分析的可行性,以过筛率和中位直径(D50)为评价指标,采用激光粒度分析仪研究了读数时间、超声分散和遮光度对石灰石粉粒度检测结果的影响,并通过与负压筛析法比较和精密度试验对激光衍射法应用于石灰石粒度分析结果进行评价。结果表明:激光衍射法分析石灰石粉粒度的最佳条件为读数时间1 min、不采用超声处理、遮光度范围10%~20%,与负压筛析法相比,该方法一致性较好,测量精密度良好,适用于石灰石粉粒度分析。
In order to study the feasibility of particle size analysis of limestone powder through laser diffraction method, screening rate and median diameter(D50) are used as evaluation indexes and the influence of reading time, ultrasonic dispersion and shading range on particle size detection of limestone powder is studied by laser particle size analyzer; besides, through comparing with the negative pressure sieve analysis method and the precision test, the feasibility of applying the laser diffraction method to the limestone powder size is verified. The result shows that the optimal condition of particle size analysis of limestone powder is as follows:the reading time of 1 min, ultrasonic absent treatment and shading range of 10%~20%. Compared with negative pressure sieve analysis, the method is advantageous in consistency and high measurement precision and therefore is suitable for particle size analysis of limestone powder.

关键词(KeyWords): 激光衍射法;负压筛析法;石灰石粉;精密度
laser diffraction method;negative pressure sieve analysis;limestone powder;precision

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 叶小君,韩洪滨,郑志明,李海燕,明菊兰,汤治,程一杰
YE Xiaojun,HAN Hongbin,ZHENG Zhiming,LI Haiyan,MING Julan,TANG Zhi,CHENG Yijie

DOI: 10.19585/j.zjdl.201909006

参考文献(References):

扩展功能
本文信息
服务与反馈
本文关键词相关文章
本文作者相关文章
中国知网
分享