何志瞧,杨敏,赵力航,杨威,卢琴芬
HE Zhiqiao,YANG Min,ZHAO Lihang,YANG Wei,LU Qinfen

• 1:浙江浙能兰溪发电有限责任公司
• 2:浙江省火力发电高效节能与污染物控制技术研究重点实验室
• 3:浙江浙能技术研究院有限公司
• 4:浙江大学电气工程学院

摘要(Abstract)：

燃煤发电厂传统制粉系统采用工频异步电动机驱动,当运行时间较久导致系统参数变化后,容易出现制粉系统出力降低、电耗增大等问题。为了研究磨煤机转速、加载力、煤粉细度和磨煤机出力之间的关系,分析磨煤机电动机采用稀土永磁电动机和中压变频器后的运行方式,设计一系列试验方案测得改造后制粉系统在不同转速、不同工况下的指标,根据试验结果给出磨煤机在轻载、中载、重载下的转速设定推荐值,指导磨煤机驱动系统的优化运行。
In coal-fired power plants, the traditional pulverizing systems are driven by power-frequency asynchronous motors, which, with the change of parameters after long-time operation, may lead to problems including output power decrease and power consumption increase of the systems. To study the relationship among rotation speed, loading force, pulverized coal fineness and output power of pulverizer, this paper analyzes the operation modes of the coal pulverizers who adopts rare earth permanent magnet synchronous motor and middle-voltage frequency converter. A series of experiments were devised to measure the indicators of the retrofitted pulverizers at different rotation speeds and in different working conditions. Based on the experiment results, recommended speed values were given for the pulverizers under light load, medium load, and heavy load to guide the optimal operation of the driving system.

关键词(KeyWords)： 磨煤机驱动;永磁同步电动机;中压变频器;控制性能优化
pulverizer-driven;permanent magnet synchronous motor;middle-voltage frequency converter;control performance optimization

Abstract:

Keywords:

基金项目(Foundation): 浙江省能源集团有限公司科技项目（ZNKJ-2020-028）

作者(Author): 何志瞧,杨敏,赵力航,杨威,卢琴芬
HE Zhiqiao,YANG Min,ZHAO Lihang,YANG Wei,LU Qinfen

DOI: 10.19585/j.zjdl.202107014

参考文献(References)：

• [1]胡洲，应光耀，余斌，等.浙江省火力发电机组非计划停运统计及预防[J].浙江电力，2020,39(1):103-109.
• [2]王友谊.300 MW火电机组磨煤机变频调速系统的应用研究[D].北京：华北电力大学，2012.
• [3]郭思远，刘铁，王赟翔，等.MPS-HP-Ⅱ型中速磨煤机主电机变频调速系统应用[J].中国能源，2015,37(10):46-47.
• [4]刘同，张丹.中速磨煤机配置高压变频器的市场应用及分析[J].上海电气技术，2015,8(4):47-50.
• [5]RODRIGUEZ J R,PONTT J,NEWMAN P,et al.Technical evaluation and practical experience of high-power grinding mill drives in mining applications[J].IEEE Transactions on Industry Applications,2005,41(3):866-874.
• [6]韩露.高压变频器在火电厂锅炉磨煤机上的应用[D].北京：华北电力大学，2012.
• [7]WU B,PONTT J,RODRIGUEZ J,et al.Current-source converter and cycloconverter topologies for industrial medium-voltage drives[J].IEEE Transactions on Industrial Electronics,2008,55(7):2786-2797.
• [8]张振阳，姬广勤，李遵基，等.中压变频技术在火电厂中的应用与研究[J].中国电力，2002,35(3):60-62.
• [9]许瑞峰，王俊有.变频调速技术在电厂辅机上的应用[J].电机与控制应用，2007,34(6):59-62.
• [10]贾贵玺，高跃，贺家李，等.高压变频调速技术在发电厂节能方面的研究与应用[J].电力系统自动化，2002,26(14):63-66.
• [11]KOR M,ABKHOSHK E,TAO D,et al.Modeling and optimization of high chromium alloy wear in phosphate laboratory grinding mill with fuzzy logic and particle swarm optimization technique[J].Minerals Engineering,2010,23(9):713-719.
• [12]李志刚，郭航，朱跃华.低速大扭矩永磁直驱系统在火电厂钢球磨煤机的应用[J].山西电力，2018(1):52-57.