蒋雄杰,顾奇凯,黄启东,孙成富,冯晓露,蒋鹏飞
JIANG Xiongjie,GU Qikai,HUANG Qidong,SUN Chengfu,FENG Xiaolu,JIANG Pengfei

• 1:浙江浙能嘉华发电有限公司
• 2:浙江大学能源工程学院

摘要(Abstract)：

介绍了渐近辨识法在某1 000 MW火电机组脱硝控制优化建模中的应用。在SCR(选择性催化还原)原常规PID闭环控制系统正常运行的情况下,采用ASYM(基于渐近辨识方法)通过在SCR装置的喷氨量指令上叠加测试信号,在不干扰SCR装置正常运行的前提下,辨识获取了高精度SCR控制模型,并以此为基础搭建MPC控制器,大大改进了SCR反应器出口NO_X浓度的控制品质。
This paper introduces the application of the progressive identification method in the modelling of SCR control optimization for 1000 MW thermal generating power units. In the case of the normal operation of the original PID closed-loop control system in SCR(selective catalytic reduction), the ASYM(asymptotic)identification method is adopted to superposing testing signals on ammonia injection amount orders. Without interfering with the normal operation of the SCR device, a high-precision SCR control model is identified and acquired. The MPC controller constructed by this model greatly improves the control quality of the NO_X concentration at the outlet of the SCR reactor.

关键词(KeyWords)： 渐近辨识法;1000 MW火电机组;高精度SCR动态模型;SCR控制系统优化;SCR出口NO_X浓度
progressive identification method;1000 MW thermal power generating unit;high-precision SCR dynamic modelling;optimization of SCR control system;SCR outlet NO_X concentration

Abstract:

Keywords:

基金项目(Foundation): 浙江省能源集团有限公司技改项目（11233017041）

作者(Author): 蒋雄杰,顾奇凯,黄启东,孙成富,冯晓露,蒋鹏飞
JIANG Xiongjie,GU Qikai,HUANG Qidong,SUN Chengfu,FENG Xiaolu,JIANG Pengfei

DOI: 10.19585/j.zjdl.202001017

参考文献(References)：

• [1]周笋.两个典型工业对象的建模与控制方法研究[D].厦门:厦门大学,2011.
• [2]国家环境保护总局、国家质量监督检验检疫总局.火电厂大气污染物排放标准:GB 13223-2011[S].北京:中国标准出版社,2011.
• [3]周洪煜,张振华,张军,等.超临界锅炉烟气脱硝喷氨量混结构-径向基函数神经网络最优控制[J].中国电机工程学报,2011,31(5):108-113.
• [4]周洪煜,赵乾,张振华,等.烟气脱硝喷氨量SA-RBF神经网络最优控制[J].控制工程,2012,19(6):947-951.
• [5]赵宗让.电厂锅炉SC.R烟气脱硝系统设计优化[J].中国电力,2005(11):69-74.
• [6]BUZANOWSKI MARK A.Fadda D Optimal ammonia injection for power plant SCR systems[C]//Proc of the ASME Power C.onference.2007,San Antonio,2007:493-49.
• [7]李刚,胡森,武宝会.基于模糊自适应Smith的SC.R喷氨量串级控制系统[J].热力发电,2014,43(8):147-150.
• [8]EPRI.Evaluation of selective catalytic reduction(SCR)system control strategies:SCR model development,validation,and application[S].EPRI,Palo Alto,CA,USA,Tech.Rep.,2002.
• [9]ZHANG H,CHEN Y,WANG J,et al.Cycle-based optimal NOx emission control of selective catalytic reduction systems with dynamic programming algorithm[J].Fuel,2015(141):200-206.
• [10]UPADHYAY D,VAN NIEUWSTADT M.Model based analysis and control design of a urea-SCR deNO_x aftertreatment system[J].Journal of Dynamic Systems,Measurement and Control,2006,128(3):737-741.
• [11]INATSUNE Y,TAKEUCHI Y,ISHIZAKI M.Completion of SCR system for ninghai power plant unit 4 in China[J].Hitachi Review,2008,57(6):293.
• [12]LI Z,JIANG J,MA Z,et al.Effect of selective catalytic reduction(SCR)on fine particle emission from two coalfired power plants in China[J].Atmospheric Environment,2015(120):227-233.
• [13]ZHU Y.Multivariable process identification for MPC:the asymptoticmethod and its applications[J].Journal of Process Control,1998,8(2):101-115.
• [14]ZHU Y.Multivariable system identification for process control[M].Netherlands.Elsevier,2001.