面向自治对象的火电机组风烟系统APS功能设计与应用Design and Application of the Autonomous Object-Oriented APS for Air and Flue Gas System of Thermal Power Units
张新胜,胡欣,王剑平,丁伟聪
ZHANG Xinsheng,HU Xin,WANG Jianping,DING Weicong
摘要(Abstract)：
通过对目前火电机组风烟系统自启停功能组设计模式与应用情况的分析,指出传统面向过程的顺序程序设计模式使得风烟系统功能组路径过于单一固化,运行使用率较低,系统缺乏必要的灵活性与实用性。在风烟系统自启停功能组中引入面向自治对象的设计模式,风机启动路径自治规划,能适应风机两侧启动、单侧启动、自动并列运行以及RB(辅机故障减负荷)工况下风机启动与并列运行等各种工况,引导运行人员改变操作习惯,构建系统操作理念。在某660 MW机组DCS(分散控制系统)进行组态,实现了风烟系统全程控制功能,实际运行表明:采用面向自治对象的风烟系统启动功能组路径灵活多样,控制系统具备较强的自治性和健壮性,能有效提高功能组的使用率及机组自动化水平。
Based on the analysis of design mode and application of the automatic startup and shutdown function group of air and flue gas system in thermal power units, the paper indicates that the traditional procedure-oriented sequential programming mode makes the system function group path unduly single and solidified, its operation rate low, and the system lacks necessary flexibility and practicability. The design pattern oriented to autonomous objects is introduced into the automatic startup and shutdown function group of the air and flue gas system. The fan starting path is autonomously planned, which can adapt to the fan startup on both sides, startup on one side, automatic parallel operation, startup and parallel operation under RB(runback) condition, guiding operation personnel to change operation habits and building system operation concepts. The DCS(decentralized control system) of a 660 MW unit was configured to realize the whole control function of the system. The actual operation process shows that the autonomous object-oriented specific system startup functional group path is flexible and diverse, and the control system is highly autonomous and robust,which can effectively improve the function group utilization and units' automation level.
关键词(KeyWords)：
风烟系统;面向对象;全程控制;启动功能组;自治性
air and flue gas system;object-oriented;full process control;startup function group;autonomy
基金项目(Foundation):
作者(Author):
张新胜,胡欣,王剑平,丁伟聪
ZHANG Xinsheng,HU Xin,WANG Jianping,DING Weicong
DOI: 10.19585/j.zjdl.202108015
参考文献(References)：
- [1]叶福南,庄伟.火电厂锅炉风烟系统全自动启动控制方案[J].发电设备,2019,33(4):257-262.
- [2]吴周晶,朱宇新,王念龙.超超临界机组风烟系统顺控研究[J].锅炉技术,2015,46(增刊1):40-44.
- [3]杨宏强,孙瑜,杜伟.燃煤火电厂智能DCS的功能设计与应用[J].热力发电,2020,49(3):100-106.
- [4]张建玲,朱晓星,寻新,等.超(超)临界机组智能控制系统设计[J].热力发电,2015,44(5):59-63.
- [5]牛海明,吴东黎,杨爽,等.超超临界1 000 MW二次再热机组自启停控制系统设计方案与实现[J].热力发电,2017,46(2):125-129.
- [6]张清健,张海安.1 000 MW超超临界机组自启停控制系统开发策略及应用[J].广西电力,2019,42(4):46-51.
- [7]刘明广,王志萍,归一数,等.基于DCS的锅炉自启停技术研究与实现[J].电力科学与技术学报,2020,35(2):184-190.
- [8]朱晓星,陈厚涛,昌学年,等.火电机组风烟系统智能控制模块设计与应用[J].中国电力,2016,49(6):1-5.
- [9]李锋,朱亚清,潘凤萍,等.1 000 MW超超临界机组风烟系统APS功能设计与应用[J].电力自动化设备,2010,30(8):116-120.
- [10]欧卫海,王立地.火力发电厂机组APS监控关键技术研究[J].南方能源建设,2015,2(增刊1):19-25.
- [11]尹峰,陈波,丁宁,等.面向自治对象的APS2.0系统结构与设计方法[J].中国电力,2018,51(10):37-42.
- [12]万文军,陈世和,陈咏康,等.面向对象的火电机组旁路控制算法设计与应用[J].中国电力,2015,48(10):43-47.
- [13]吕当振,宾谊沅,李文军,等.600 MW超临界机组锅炉轴流风机并列与过程控制技术[J].中国电机工程学报,2020,40(17):5574-5583.
- [14]严晓勇.轴流式风机失速原因分析及处理[J].热力发电,2009,38(4):44-46.
- [15]刘霜.火电机组大型风机特性分析与优化控制研究[D].北京：华北电力大学,2019.