电力行业标准《输电线路金具磨损试验方法》技术说明及应用Technical Description and Application of Abrasion Test Methods for Fittings of Transmission Lines
汪立锋,钱科,钱苗,盛叶弘,洪静
WANG Lifeng,QIAN Ke,QIAN Miao,SHENG Yehong,HONG Jin
摘要(Abstract)：
主要介绍了新编制的《输电线路金具磨损试验方法》行业标准的编制原则和依据,并对标准中的技术要求、磨损试验的载荷、频率、摆动角度、磨损次数等性能指标和试验方法进行了说明,以架空输电线路地线用连接金具和悬垂线夹为试验材料,验证标准规定的方法和技术指标的可行性和科学性,以供标准使用者参考。
This paper mainly introduces the compilation principles and basis of Abrasion Test Methods for Fittings of Overhead Transmission Lines, and it explains the performance indexes and test methods such as technical requirements, load of abrasion test, frequency, swing angle, abrasion times. The tests of link fittings and suspension clamp for earth wires of transmission lines verify the feasibility and effectiveness of the methods and performance indexes set in this standard to provide reference for standard users.
关键词(KeyWords)：
连接金具;悬垂线夹;耐磨试验;技术应用
link fittings;suspension clamp;abrasion resistant test;technical application
基金项目(Foundation):
作者(Author):
汪立锋,钱科,钱苗,盛叶弘,洪静
WANG Lifeng,QIAN Ke,QIAN Miao,SHENG Yehong,HONG Jin
DOI: 10.19585/j.zjdl.2016.11.015
参考文献(References)：
- [1]唐波,杨暘,孟譢民.山区超高压输电线路地线金具的磨损研究[J].四川电力技术,2011,34(1):13-15.
- [2]何成,李文胜,俞敏波,等.输电线路连接金具摆动磨损试验机的研制[J].价值工程,2013(20):60-61.
- [3]GB 50545-2010,110~750 kV架空输电线路设计规范[S].北京:中国计划出版社,2010.
- [4]柴绍斌.基于神经网络的数据分类研究[D].大连:大连理工大学,2007.
- [5]潘丹青.500 kV线路架空地线悬垂线夹磨损及预防措施的探讨[J].东北电力技术,1998(8):12-19.
- [6]葛灵丹,王树奇,杨子润.7075铝合金的磨损行为及其机理探讨[J].特种铸造及有色合金,2011,31(2):178-182.