李国尧,况骄庭,钱锋
LI Guo-yao,KUANG Jiao-ting,QIAN Feng (Zhejiang Electric Power Design Institute

• 1:浙江省电力设计院

摘要(Abstract)：

电缆支架按原材料不同分为角钢、型钢等金属支架和以非金属基纤维复合材料为主的复合材料支架。分别介绍传统金属电缆支架和常见的复合材料电缆支架的特点,对复合材料电缆支架进行技术经济比较及试验分析,结果表明复合材料电缆支架性价比更优,特别适合在腐蚀性环境中应用。
The cable supports can be divided into angle steel supports and section steel supports in terms of different raw materials as well as composite cable supports which adopts non-metallic matrix composites.The paper introduces characteristics of traditional metal cable supports and the common composite cable supports.The comparison of technical and economical efficiency of composite cable support and the analysis on the test show that the composite cable supports are of superior cost performance and especially suitable to be used in corrosive environment.

关键词(KeyWords)： 电缆支架;复合材料;SMC;热固性FRP;塑包钢
cable support;composite;SMC;thermosetting fiber reinforced plastics;steel-plastic

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 李国尧,况骄庭,钱锋
LI Guo-yao,KUANG Jiao-ting,QIAN Feng (Zhejiang Electric Power Design Institute

DOI: 10.19585/j.zjdl.2013.05.006

参考文献(References)：

• [1]GB 50217-2007电力工程电缆设计规范[S].北京:中国计划出版社,2008.
• [2]浙江省电力公司基建部.变电工程标准化工艺设计[M].北京:中国电力出版社,2010.
• [3]张树华,顾钧扬.复合材料电缆支架[J].广东电力,2001,14(6):33-36.
• [4]史任卿,郑恩国.高强度复合材料电力电缆支架技术性能研究[J].供用电,2011(2):61-64.
• [5]李聪华.复合材料电缆支架在地铁中的开发及应用[J].电气化铁道,2005(1):45-47.