朱海貌,陈达,曹辉,刘冲
ZHU Haimao,CHEN Da,CAO Hui,LIU Chong

• 1:国网浙江省电力公司温州供电公司

摘要(Abstract)：

描述了红外成像技术在温州电网的应用情况,对温州地区4起典型的电力设备发热案例做了分析介绍,表明了通过红外测温可发现绝缘故障、套管渗漏油、损耗异常增大、末屏虚接等电气设备故障,通过跟踪分析发现缺陷,可为进一步的检修决策提供有效依据。
The paper expounds application of infrared imaging technology in Wenzhou power grid. It analyzes and introduces four typical heat cases of electrical equipment in Wenzhou, indicating that infrared temperature measurement can detect electrical equipment faults such as insulation faults, oil leakage of bushing, abnormal increase of loss and fake connection of end shield as well as detect the defects through tracking and analysis, which can provide effective basis for further decision-making of maintenance.

关键词(KeyWords)： 电气设备;红外成像;发热;故障诊断;典型案例
electrical equipment;infrared imaging;heat;fault diagnosis;typical case

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 朱海貌,陈达,曹辉,刘冲
ZHU Haimao,CHEN Da,CAO Hui,LIU Chong

DOI: 10.19585/j.zjdl.2014.08.007

参考文献(References)：

• [1]张攀.红外线测温在判断电气设备热故障中的应用[J].湖北电力,2009(4):28-29.
• [2]朱海貌,黄锐,夏晓波,等.金属氧化物避雷器带电检测数据异常的诊断及分析[J].电瓷避雷器,2012(2):68-71.
• [3]孟庆大,杨敏祥,毛婷.一起500 kV高压套管油位低缺陷的分析与处理[J].电瓷避雷器,2013(1):12-15.
• [4]曹辉,陈长杰,万晓.变电站内开关室穿墙套管板发热原因分析及处理[J].电气工程与自动化,2012(12):9-10.