赵洪宇,罗志浩,陈波
ZHAO Hong-yu,LUO Zhi-Hao,CHEN Bo(Zhejiang Electrical Test and Research Institute

• 1:浙江省电力试验研究院

摘要(Abstract)：

在对某600MW超临界四角切圆燃烧锅炉的汽温及烟温偏差进行研究的基础上,系统地分析了过热器出口汽温偏差及再热器出口烟温偏差形成的机理、影响因素和对策。认为炉膛出口气流的残余旋转是造成水平烟道区域烟温和气流速度偏差的根本原因。在采取有效措施后,过热器出口汽温偏差和再热器出口烟温偏差得以减弱。
Based on the study of steam temperature and flue gas temperature deviation of 600 MW supercritical tangentially fired boiler,the forming mechanism,influencing factors and countermeasures of steam temperature and flue gas temperature deviation in the horizontal duct behind the exit of boiler furnace with tangential firing are systematically analyzed;it is thought of that the flue gas velocity deviation caused by the remaining turning at the exit of furnace is the fundamental reason for flue gas temperature deviation forming.After the effective measures for improving and eliminating flue gas temperature deviation are indicated,the steam temperature deviation of the outlet from super heater and the flue gas temperature deviation of the outlet reheater have been weakened,and over-temperature problem of reheater tube has been resolved.

关键词(KeyWords)： 超临界锅炉;切圆燃烧;再热汽温;烟温偏差
supercritical boiler;tangential combustion;reheating steam temperature;gas temperature differential

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 赵洪宇,罗志浩,陈波
ZHAO Hong-yu,LUO Zhi-Hao,CHEN Bo(Zhejiang Electrical Test and Research Institute

DOI: 10.19585/j.zjdl.2010.03.009

参考文献(References)：

• 曾汉才,鲁学农.大型锅炉水平烟道左右两侧烟温偏差问题研究[J].电站系统工程,1996,12(3):4-8.
• 李雪亮,刘志超.1025t/h四角切圆锅炉炉膛出口烟温偏差研究[J].中国电力,1997,30(6):3-5.
• 郑晓康.北仑电厂1号炉炉膛出口烟温偏差及再热蒸汽温度偏低的试验研究[D].杭州:浙江大学,1995.
• 周俊虎,宋国良,陈寅彪,等.2008t/h四角切圆燃烧锅炉炉膛出口烟温偏差的试验研究[J].热力发电,2003,32(6):31-35.
• 刘泰生,姚本荣,许晋源.大型切向燃烧锅炉再、过热器布置方式初探[J].热能动力工程,2000,15(5):56-563.